![]() More details about my network: This computer sits behind a Vodafone Easybox. My problem is configuring my network/router, since it seems to lack any port forwarding options. Possible that you would need to set broadcast-forward to enable for this to work as well. I was thinking about using the TeamViewer Wake on Lan fuctionality, but any other solution to start the pc is welcome as well. 192.168.10.255) and an arbitrary destination port should get you what you wanted. If you definitely can't directly route to the destination for one reason or the other, creating a UDP port forwarding rule from the reachable interface at an arbitrary port to your designated network's broadcast IP address (e.g. Using port forwarding to a broadcast address E.g.: your client subnet is 192.168.10.0/24, you would generate a WoL UDP packet to 192.168.10.255 and get it routed, your last routing hop would send it as a broadcast over the interface connected to the 192.168.10.0/24 network.Īccording to the reference documentation, FortiOS command for enabling directed broadcast forwarding would be config system interface edit set broadcast-forward enable 2. This feature allows you to conserve power by keeping a device turned off when it is not needed, but allows a remote system to turn it on when it is needed. Routing a directed broadcast packetĪ "directed" broadcast would be a packet destined for a foreign IP subnet which would be addressed to that subnet's broadcast IP address and sent out as a broadcast by the last hop in the routing path. Wake-on-LAN is a way to remotely power up a network-attached device, like a computer or storage system. You also would need to configure your Fortinet router accordingly using one of these choices: 1. For Windows, Gammadyne's wol.exe would do pretty much the same. Many utilities available would just send a raw Ethernet frame to a local network so they would not meet the requirements.įor Linux, there is the wol utility which can do this. Generation of UDP WoL packets would require a utility which is able to craft a packet with a specific destination address. As you need the packet routed, the UDP protocol is the obvious choice - it is encapsulated in IP and thus routable, it is connectionless and thus broadcastable. WoL is quite protocol-agnostic, so basically any broadcast frame meeting the specific criteria would do. How to generate a WoL packet destined for a foreign network ![]() To activate Wake-on-LAN for the network card under Mac OS X, follow these steps: 1. 12 7.1.1 Set up port forwarding to the broadcast address of the local network. The generating host does not have to be your machine - it can be any host capable of sending packets to the destination network. TeamViewer Manual Wake on LAN En - Free download as PDF File (.pdf), Text File (.txt) or read online for free. I have no experience with Fortinet gear, but if the WoL Packet generation is unsupported by the router in question, the commonly taken approach would be to generate the packet on a different network and let it get routed to the destination.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |